When a player connects with a Factorio version and set of built in mods
no lobby runs, the lobby plugin now creates one on a connected host that
has the version installed or can download it, with a mod pack matching
the player's built in mods. This lets a cluster accept players on
several Factorio versions on the same port without any setup. It can be
turned off with lobby.auto_create.
To pick the mod pack the proxy now waits for the whole connection
confirm before routing and passes the mods listed in it to the
playerProxyRoute hook. Hosts answer the new HostFactorioVersionsRequest
with the versions they have installed.
The server list in lobbies only shows instances on the Factorio version
of the lobby, with a checkbox to also show the others greyed out.
The player proxy now listens on 34197 by default. New hosts default to
the port range 34200-34299 so they don't hand that port to instances,
and the controller logs an error and runs without the proxy if the port
is taken, as hosts with the old range only skip it when the controller
already holds it.
Lobby instances start the save lobby.zip, created on first start as a
one tile map with no autoplace and with the freeplay scenario replaced by
an empty one. This uses the new chooseSave instance hook, which lets
plugins pick or create the save to start, and setSaveScenario from
@clusterio/host, which sets the scenario the save patcher keeps loading.
Map gen settings can't use a width and height of 0 for this, as Factorio
takes 0 to mean an unlimited map.
The address players reach the proxy on moves from lobby.public_address
to controller.player_proxy_public_address. When it's set the player_auth
login page lists it once for the instances behind the proxy instead of
their own addresses, and lobbies with player_auth loaded get a button
that opens the web interface login dialog.
Players connecting through the player proxy are sent to a lobby
instance running their Factorio version, where an in-game list shows
the instances in the cluster. Picking one starts it if needed and moves
the player there with LuaPlayer.connect_to_server once it's running,
while the proxy keeps routing the player to it until they have joined,
covering the second connection Factorio makes to fetch a user key.
Players connecting to the dedicated port of a stopped instance wait in
a lobby while it starts instead of timing out.
The cluster can be listed in the Factorio server browser as one game
per lobby version with the players online in the whole cluster, and
instances with a dedicated proxy port can be listed on their own,
including while stopped. The listed build comes from probing the
instance through the proxy, as the browser only shows games with the
exact version and build of the client.
The controller now creates the player proxy before loading plugins so
they can use it from their entrypoints.
Every RCON command makes an auto paused Factorio server run one tick, so
subspace_storage's 1 s inventory update and 5 s ping, plus a
statistics_exporter gather on every Prometheus scrape, kept a server with
nobody online running at about 1.3 ticks per second.
The instance now records the auto_pause server setting it was started
with and exposes autoPaused, true while that setting is on and no players
are online, along with an autoPauseChanged hook. subspace_storage skips
its timers while paused and sends a ping and inventory as soon as a player
joins. statistics_exporter gathers once after the game pauses and keeps
serving those values until it resumes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Replace ESLint, typescript-eslint, eslint-plugin-node and the flat
config helpers with vite-plus, which runs Oxlint for vp lint. The rules
are carried over from eslint.config.mjs by @oxlint/migrate into the lint
section of the root vite.config.ts. The formatting rules ESLint
deprecated run as @stylistic rules through Oxlint's JS plugin support,
and disable comments naming them are updated to the @stylistic names.
@stylistic understands TypeScript syntax that the core rules skipped,
so the autofix adds missing semicolons and spaces in type literals and
aliases. Leading | and & in multiline types stay where they were.
Oxlint's node/no-sync also reports identifiers ending in Sync that are
not calls. The test helper techSync is renamed and the two other names
are ignored.
Refs #1127
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Replace webpack and Module Federation with Vite 8. The controller build
emits one entry per shared module (lib, web_ui, typebox, antd, react,
react-dom, react-router) and lists them in manifest.json. The controller
turns that into an import map in index.html, and plugins are built as
ES modules that import the shared modules by name and are loaded with
import().
The shared Vite setup lives in @clusterio/web_ui/vite.mjs. Plugins use
clusterioPlugin(), which exposes index, package.json and web/index under
the same keys the webpack template used. The --dev and --dev-plugin
flags now run the Vite dev server in middleware mode with hot module
replacement.
Browser polyfills move from web_ui to lib, which is the code that needs
them, and lib sets the process and Buffer globals itself.
Refs #1127
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Error responses now carry the registered name of the thrown error's
class, and the requester rejects with an instance of that class instead
of a generic RequestError. Error classes are registered like message
classes, and plugins list their own in `errors`.
RequestError is replaced by a hierarchy following the HTTP status codes:
ClientError (ValidationError, ForbiddenError, NotFoundError,
TimeoutError, ConflictError) and ServerError (InternalServerError).
PermissionError is PermissionDeniedError and the config errors
InvalidValue, InvalidField and InvalidAccess gain an Error suffix.
Link logs only errors whose class is not registered. These arrive on the
other side as InternalServerError with the original message and stack,
so an error forwarded through the controller is logged once, where it
was thrown.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The download a join forces after dropping a copy that took the body found the
player already a spectator, so it kept the spectator's place and restored the
character there. It now takes the surface, position and vehicle the dropped
copy kept.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The leave handler skipped the upload for any active download, including a
prefetched copy no join had confirmed, which has replaced nothing here. Newer
local data, such as after a failed upload whose retry the join cleared, was then
never uploaded. Only a real download skips it now; a copy whose join took the
body still uploads nothing through sync_in_progress.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A copy confirmed at an earlier join has replaced the body with a spectator.
If a later join drops it (another controller run) while the generations match,
the join kept the local state: a spectator with no body, uploaded on the next
leave. Download instead. A newer copy replacing a held one keeps where the
body stood, so the replacement still counts as having taken it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An admin import or delete bumps the stored data's epoch and can start the
generations over, so a copy held from before it must not apply. The prefetch
carries the epoch like the token, and a held copy is used only when it matches
the acquire reply's.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An instance with older data can upload the generation a save already holds, and a prefetch of it then overwrote that
save's newer state. A join now drops a prefetched copy unless the ordinary download check says the data is needed.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Chunks of an earlier controller run's copy still in flight could land in a newer run's copy of the same generation. Every chunk now carries the token, and the scenario ignores a chunk whose token differs from its record's.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
If the controller crashes after sending generation N but before saving it, the destination keeps that prefetch while the controller restarts at N-1, and another instance can then upload different data as generation N. The controller now picks a random token per run, sends it with every prefetch and acquire reply, and the scenario applies a held copy only when its generation and token both match, and lets a new run's copy replace one with another token.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A prefetched copy is sent without the save's list of cleared recipes, so
its delta had only add, and a recipe cleared on the destination but not
in the stored list stayed cleared where a download would give it its
notification back. Without a current list the instance now sends the
whole stored list marked full, and the save gives the recipes it has
cleared that aren't in it their notification back, as a download's
remove does.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
player_sync.prefetch_inventory holds a copy sent ahead in active_downloads
and finished_downloads, for a player who is offline or doesn't exist on
the destination, with the components its first chunk names. Chunk 1
refuses a player who is online, a download in progress, a stream of the
same or a newer generation and a finished copy of a newer one; a finished
copy of the same generation is replaced. At the acquire reply a copy is
used only when the reply is acquired with its generation and its
components are the ones the scenario syncs now. The player is then
switched to spectator as a download does and the copy is applied, at once
or at its last chunk. Otherwise the copy is dropped and the join
continues as before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A plugin that moves a player calls remote.call("player_sync",
"set_destination", player_name, instance_id) before connect_to_server.
It only records the destination. Every leave clears it, and a leave
that uploads with reason switching_servers adds it to the upload as
destination_instance_id. The README describes it for plugin authors.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The instance passes destination_instance_id from a leave upload on as
destinationInstanceId, and sends a PrefetchEvent's data to
player_sync.prefetch_inventory in RCON chunks, using the download's
chunk loop. As for a download, the data is stripped by the instance's
own player_sync.sync_* options and the components go with the first
chunk. A non-empty reply means the save refused or ignored the copy and
stops the transfer.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
An upload can carry destinationInstanceId. Once the upload is stored,
the controller sends the stored data, the upload merged with its copy,
in a PrefetchEvent to that instance, if it is another running instance
with player_sync enabled. No lock is taken or released. A failed send is
logged and doesn't fail the upload.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A QueueEvent arriving in the same socket read as a QueueSyncRequest reply is
applied before the reply, which then wrote the older queue over it. Skip the
reply when a QueueEvent was applied while it was in flight.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The drawer actions move to its header as Export, Import and a trash
icon for Delete. Import and Delete are disabled while an instance
holds the player, since the stored data is out of date until it
uploads. The drawer also shows color and cheat mode.
Inventory tables get title case names, pagination at 10 rows, item
search, sorting and quality icons. The player list shows force with
a filter instead of generation, and the database stats use
Descriptions without the largest entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Imports no longer accept the cutscene controller, which needs waypoints
to restore. Logistic filters and the basic item stack fields now have the
types and limits Factorio enforces, and the inventory summary skips
malformed items and counts repeated exported items once instead of
expanding them.
Lua's JSON loses precision past 2^50, so a generation there could no
longer be counted up and uploads were discarded. Imports now start over
from generation 1 when the stored or imported generation is at that limit.
Instances holding a copy from another epoch take the stored generation
instead of keeping their own higher one when there is no data to download.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
research_queue_api is compat.version_ge("2.0.56"), named like player_sync's version checks, so it doesn't read as a
setting. Handlers check it at the top; only the three research queue events are registered behind it.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Imports and uploads could carry deleted: false, which the loader took for
a tombstone on the next restart. The schemas now reject the property, and
the loader only treats deleted: true as a tombstone and strips the key from
entries already saved with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An import with color but no chat_color or tag assigned nil to the missing
LuaPlayer properties and failed restoration.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The raise covered the whole gap between the serialized main inventory
and the main inventory with the armor restored, but only the bonus of
the armor's equipment arrives at the end of the tick. When the
destination force has a smaller character_inventory_slots_bonus than
the source, the rest of the gap never arrived and removing the raise on
the armor event dropped those slots on the ground. The raise is now the
equipment's inventory bonus minus what the grid already applies, at
most the gap, and the slots past it overflow into a corpse as without
the raise. Factorio 1.1 has no inventory bonus equipment and gets no
raise.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
on_player_armor_inventory_changed for the restored armor is raised at
the end of the download's tick, after the inventory bonus of the armor's
equipment applied, so the raise is removed there instead of in the next
tick's on_tick. The raise is only made for armor with a grid, as the
event needs the armor to be restored.
A player leaving on the tick of a download no longer has the raise
removed from the character first, which shrank the main inventory
before the bonus applied and spilled the extra slots. The raise is
taken off the uploaded inventory bonus instead.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The inventory bonus of equipment in the armor's grid (toolbelts) is
applied by the engine on the tick after the armor is inserted. The main
inventory was restored in the same tick, so the items of every slot past
80 plus research plus the armor's own bonus did not fit and were put in
a corpse: legendary mech armor with legendary toolbelts left 2125 of
2330 slots in the corpse.
The armor is now restored first, the character's inventory bonus is
raised to fit the saved main inventory, and the raise is removed again
on the next tick, or before an upload if the player leaves first.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Document the cluster research queue in the plugin README and the root
README. Review fixes: ipairs for queue order, event annotations on the new
Lua handlers, an IpcQueue type, a test for clearing the queue, and drop the
controller import from test/missing.js.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The last event of a tick now decides which player the queue edit is attributed to.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The save module reports queue edits on a following tile, applies the cluster
queue (dropping unknown technologies), and offers a lab-window checkbox.
All new events are gated on Factorio 2.0+.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Forward queue edits and follow requests from the save to the controller,
and apply controller broadcasts and the start-up sync to the save.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
- QueueUpdateEvent, QueueEvent and QueueSyncRequest messages.
- The controller keeps one queue (max 7 names) in research_queue.json, saved with the other data.
- An update that changes the queue replaces it and is broadcast as QueueEvent; an equal update is ignored.
- QueueSyncRequest returns the queue and seeds it from the request when the queue is empty.
- A finished technology (completing contribution, advancing FinishedEvent, technology sync) drops its first queue entry without a broadcast.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Danielv123