Controller.bootstrap and Host.bootstrap returned constructor arguments
that the caller had to spread into new Controller/Host, and
DatastoreProvider.bootstrap did the same for datastores. They are
replaced by Controller.fromConfig, Host.fromConfig and
KeyValueDatastore/SubscribableDatastore.fromProvider, which load the
data and return the finished instance.
Closes#1126
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Factorio 2.1.18 removed PollutionSettings::max_pollution_to_restore_trees,
but readPollution still read it for every version, so every map setting
after it was read 9 bytes late: enemy_attack_pollution_consumption_modifier
came out as garbage, the enemy_evolution factors shifted by one field and
enemy_expansion.enabled and both expansion distances came out null.
Read the field only for strings older than 2.1.18. Add modified_v2_1_17
and modified_v2_1_18 fixtures generated with headless 2.1.17 and 2.1.18
from the modified 2.1 settings (base game only), unit tests asserting
their full decoded output, and use the 2.1.18 string for the
load-scenario integration test on 2.1.18 and later.
Fixes#1131
Co-authored-by: ColumbusLabs <287001685+ColumbusLabs@users.noreply.github.com>
Co-authored-by: Cooldude2606 <25043174+Cooldude2606@users.noreply.github.com>
The send buffer limit in controller.max_send_buffer_size is set in MiB, but
buffered messages were measured with String.length, which counts UTF-16 code
units. Messages with non-ASCII text could go over the configured size in bytes
before the session was ended.
Measure each serialised message with Buffer.byteLength when it is buffered,
keep that size with the entry, and subtract the same size when it is
acknowledged. The web UI build already provides Buffer through the buffer
polyfill.
Fixes#1108
Co-authored-by: ColumbusLabs <287001685+ColumbusLabs@users.noreply.github.com>
Browsers have no setImmediate. The web bundle only had one because jszip
depended on the setimmediate package, which installs it as a global.
Since jszip was replaced in #1011 every component using a subscription
threw on unmount, breaking page changes in the web interface.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Replace jszip with yauzl and yazl
jszip loads a whole archive into memory to read it and buffers the
output when writing. Saves and mods can be several hundred megabytes,
so read zips with yauzl, which only reads the central directory and
streams entries on demand, and write them with yazl, which streams the
output.
lib gains a ZipArchive wrapper around yauzl with the lookup helpers the
callers need, findRoot() now takes it instead of a JSZip. Saves are
patched by streaming every kept entry into a new zip, mod info.json is
read straight from the file, exports are streamed to the controller and
Factorio zip downloads go through a temp file instead of a buffer.
Patching now inflates and deflates each entry again where jszip reused
the compressed data, on a 336 MB synthetic save that is 7 s instead of
0.7 s, with peak memory going from 416 MB to 151 MB.
Closes#1002
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Copy save entries without recompressing them
yazl inflates and deflates every entry it is given, so patching a save
took ten times longer than with jszip, which reused the compressed
data. Add a ZipWriter to lib that streams entries out as they are
added and copies entries from a ZipArchive byte for byte, with ZIP64
structures when sizes or offsets need them, and use it in patch().
On a 336 MB synthetic save patching now takes 0.4 s at 143 MB peak RSS
against 0.75 s at 417 MB with jszip. Factorio loads the result.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Handle save write errors before the patch loop awaits them
A write error on the temporary save, such as a full disk, rejected the
pipeline promise while addEntry() or addBuffer() was still pending. Nothing
was listening yet, so the host's unhandledRejection handler exited the
process instead of failing the instance start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep the export zip cache local to each export
The cache was module level, so when two instances on one host exported at
once, the first to finish closed archives the other was still reading.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Start writing zips before adding files from disk
yazl reads files passed to addFile() as soon as they are added. An
unreadable file emitted an error while the directory traversal was still
running, before the output pipeline existed, and the process exited on the
uncaught error. build_mod and zipDirectory now start the pipeline first and
reject instead. build_mod also removes the partial zip on failure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Danielv123 pointed out the recv_udp crash was fixed in 2.1.10, not
2.1.12: recv_udp used an input action for synchronisation which the
headless server could not send without a player index. Verified on
downloaded headless builds, 2.1.9 crashes and 2.1.10 works.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Factorio 2.0.59 through 2.1.11 crash with "Trying to add invalid input
action to the closure" when helpers.recv_udp dispatches a received
packet, whether polled from on_tick or called from a command and
whether or not the server is paused. Reproduced on headless 2.0.77 and
2.1.8, works from 2.1.12 on. FactorioServer now refuses to start with
Lua UDP enabled on older versions, the docs say 2.1.12, and the
integration tests only enable it on 2.1.12 or later.
The to-game integration test polls recv_udp from on_tick like the
clusterio module does and sends commands to make the empty server tick.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Add opt-in UDP messaging between the host and the Factorio server using
the --enable-lua-udp option of Factorio 2.0.59+. When
factorio.enable_lua_udp is set the instance binds a localhost UDP socket,
starts Factorio with --enable-lua-udp on factorio.lua_udp_port (random
if null, like the RCON port) and tells the clusterio module the host port
via clusterio_private.update_instance.
Data from Factorio is sent with clusterio_api.send_udp(channel, data) in
the same IPC format as send_json, so plugins receive it through the
existing ipc-<channel> events. Packets not sent from the Lua UDP port
are ignored, as that is the only unauthenticated way into the IPC
handler. Data to Factorio is sent with the new sendUdp method on
instances and instance plugins, and is dispatched in-game as
on_udp_packet_received events by polling helpers.recv_udp every tick
from the clusterio module.
Plugins requiring UDP declare the new LuaUdp feature flag, which like
SavePatching and ScriptCommands refuses to load the plugin on instances
without the option enabled.
Verified against a headless 2.1.17 server: send_udp and recv_udp are
silent no-ops when the option is off, so a stale port in a save that is
moved to an instance without UDP does no harm. The integration test
matrix now starts the instance with UDP enabled on Factorio 2.0.59+ and
round trips a player event over it.
Closes#969
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The staging copy made by Config.set() went through the constructor, so
plugin migrations ran a second time on the live fields. A version-gated
migration was applied twice when setPluginVersions() changed the version.
Staging now copies the fields with update() instead.
A config saved without <plugin>.version got the running version as its
default, so setPluginVersions() saw no change and nothing saved the stamp.
The constructor now writes the registered plugin versions after the
migrations run and marks the config dirty when that changes a loaded value.
Controller.bootstrap() saves the instances that came out dirty, and
setPluginVersions() is gone.
Restructure the SyncHook and plugin config tests by method, and suggest the
controller config version for role migrations in the docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plugins had no way to update the config fields and permissions core stores
for them, so renaming inventory_sync needed migrations in core packages.
A plugin can now declare a migrationEntrypoint. It's loaded on the
controller and hosts before configs and roles are read, for every plugin in
the plugin list, and attaches handlers to sync hooks for the controller,
host and instance configs and roles. lib gets helpers to rename config
fields and permissions, and each config gets a hidden <plugin>.version field
set after load so migrations can tell which version saved the data.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The controller logs the url and query of every HTTP request. Plugins
doing OAuth get the authorization code as a query parameter on their
callback route, so it ended up in the log. redactUrl now accepts a
path, code joins the redacted parameter names, and redactQuery covers
the parsed query in the log metadata.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Plugins installed from npm are listed by package name, but the plugin
loader joined that name onto the main and entrypoint paths and imported
the result as a file, which resolves relative to the working directory.
Every npm installed plugin then failed to load. Resolve these paths from
the directory of the plugin's package.json instead.
Since the move to ES modules and pnpm 12, packages installed from npm
fail to start:
- The package imports of @clusterio/lib point Node at TypeScript
sources, which Node refuses to strip types from inside node_modules.
- The controller, host and ctl import their package.json from next to
the compiled entrypoint, a copy pnpm leaves out of the package.
- ctl, host and web_ui have no .npmignore, so pnpm packs them using the
repository .gitignore and leaves out nearly all of dist/.
Resolve the package imports to the compiled files at runtime while
keeping the sources for type checking, import package.json by package
name so it resolves to the real file, and add .npmignore files so pnpm
packs the same files as npm.
EventSubscriber registers with the control's onAccountUpdate when it
has one and resends its subscription through handleAccountEvent. A lost
permission makes the request fail, a granted one syncs it again.
The web Control also reports the account on connect, so resends are
queued and sent once per tick. A failed subscription request now sets
synced to false and notifies callbacks, before the error never reached
the UI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The old name read as an unconditional unsubscribe. Log following has
its own subscription outside SubscriptionController, so check
core.log.follow on permission changes too. Move the per-connection
work into one helper and split the tests into userPermissionsUpdated
and rolesUpdated, checking the account update event is sent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add controller.max_send_buffer_size in MiB, default 64 and 0 for no
limit. Close with 1013 instead of 1008 on overflow: clients treat 1008
as fatal, so a host would shut down and the web UI would log out. With
1013 the client resumes, the controller answers with invalidate since
the session has ended, and the client registers a new session.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Lowering the limit at runtime would leave connections holding more
filters than allowed, so read it once when the controller starts.
Move the limit tests into the subscribe and replace groups.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every message sent over a link is kept in the send buffer until the
other side acknowledges it with a heartbeat, so it can be resent if
the session resumes. Nothing forced a peer to acknowledge, so a client
that kept heartbeating without a sequence number while subscribed to a
busy event made the controller buffer messages until it ran out of
memory.
Store buffered messages serialised, track their total size, and close
the connection once it goes over maxSendBufferSize. The controller
sets this to 64 MiB for the connections it accepts. A client that far
behind could not resume in a reasonable time anyway.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The permission for a subscription was only checked when subscribing,
so a control connection kept receiving events after the user's roles
or role permissions changed to no longer allow it.
Add SubscriptionController.unsubscribeUnpermitted which rechecks every
subscription of a link and removes the ones the user is no longer
permitted, and call it for the affected control connections from
userPermissionsUpdated and rolesUpdated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A subscriber could keep sending subscribe requests with new filters and
the controller would add every one of them to the subscriber's filter
set without bound, growing memory until it ran out.
Add controller.max_subscription_filters (default 10000) and reject
subscribe and replace requests that would leave a subscriber holding
more filters than that for one event.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A handler that only updates gauges has nothing to yield. collect() already
dropped undefined results at runtime, now its type says so too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Not every plugin arrives through PluginInstallRequest. Plugins checked
out into external_plugins or installed by hand on the machine never
flag a restart, so the web UI shows nothing and tooling that acts on
the flag never fires.
HostMarkRestartRequiredRequest and ControllerMarkRestartRequiredRequest
set config.restartRequired, guarded by the existing restart
permissions. They are exposed as "Mark Restart Required" in the control
dropdown of the host and controller pages, hidden once the flag is set,
and as mark-restart-required ctl commands. The mark shows up on the
next system metrics poll.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The behaviour of creating the config file if it's missing while
convenient causes confusion and problems when the tools are run
in the wrong folder. They end up creating a shadow installation
and misdirect the user with nonsensical error messages, instead
pointing to the real problem which is that the tool can't find
the configuration needed to actually run.
Require a config file to be present at startup and refuse to run if this
file is missing. To support the odd use-case of creating the config
when missing a --create-config flag is added. To conveniently generate
a config file to edit out from the "config create" command is added.
Ctl ended up calling its main class for "Control" for historical
reasons, along with its config file and plugin entrypoint.
The plugin entrypoint was renamed to ctl in 808eda0513. This
finishes that renaming by also renaming the main class, default config
file, config-control command, and main entrypoint.
The config-control command is renamed to config to be consistent with
the host and controller's config commands.
The term "control" is still kept in the config and message locations as
a common specifier for both ctl and web_ui.
A permission function runs during ingress permission checking, before
the request body is validated. UserBulkImportRequest.permission read the
raw, unvalidated message.data and threw a bare Error for an unknown
importType. That error is not a PermissionError, so _processMessage
rethrew it to the connector "message" listener, which emitted "error" on
the connector. Controller-side connectors have no "error" listener, so
Node rethrew and handleUnhandledErrors exited the process.
Repro: a control client with client-side validateSent disabled sends
UserBulkImportRequest with importType "foo"; the client gets a normal
RequestError response and the controller then logs a fatal uncaught
exception and exits.
Fix both layers: _processMessage now logs and drops an unexpected error
from the permission check (control connections only, where a response
was already sent) instead of rethrowing, and UserBulkImportRequest
throws a PermissionError for an unknown importType so it is denied
cleanly. A genuine PermissionError still denies silently as before.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Two writes to the same file at the same time shared one temporary name, so the second write clobbered the first's temporary and the first rename left the second call with nothing to rename, failing with ENOENT. The host does exactly that when it saves an instance config while the instance saves it too.
The temporary now carries a random tag and is created exclusively, so concurrent writers never touch each other's file. Since the temporary is always new, the mode is applied on creation and the chmod for reused leftovers goes away. A failed rename removes its temporary instead of leaving it for the next write to overwrite.
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
yargs, @types/yargs, semver and @types/semver are used by several packages at the same version. Also point the remaining direct references to @swc/core and react-router-dom at their existing catalog entries.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Raise every caret range to the current latest within its major, in the
root package.json, the pnpm-workspace.yaml catalog, the per-package
package.json files and the create plugin template.
Majors taken: eslint 10, @eslint/js 10, globals 17, nyc 18,
@types/express 5, @types/node 24, finalhandler 2, pidusage 4,
style-loader 4, css-loader 7, yargs 18 (all packages), chalk 6.
Majors skipped: mocha 12 (integration suite fails under it, 59 tests,
starting with a 30 s timeout in clusteriocontroller run; kept at
^11.8.0), inquirer (10+ is a rewrite on @inquirer/prompts where
ui.Prompt.prototype.close no longer exists, so the win32 readline
workaround in create.js would have to go and cannot be verified here),
react/antd/react-router-dom/@types/react, typescript 7,
@sinclair/typebox, webpack-merge (exact pin), webpack-dev-middleware,
webpack-manifest-plugin, winston-daily-rotate-file.
Code adaptations: the two /api/stream/:id handlers in routes.ts are
typed Request<{ id: string }> because @types/express 5 types
req.params values as string | string[]; eslint.config.mjs adds
newIsCapExceptions: ["constructor"] because eslint 10.10 new-cap now
reports `new this.constructor()`.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The metrics endpoint fans out a gather to every connected host, so
anyone who could reach the controller could read cluster statistics and
put load on all hosts at will. Scraping now needs a user token holding
the new core.controller.metrics permission. The token is accepted via
Authorization: Bearer as well as X-Access-Token because Prometheus can
only send the former. Concurrent scrapes share one gather so hosts see
at most one metrics request at a time.
The three connection gauges in controller.ts now no-op before the
controller exists, like the other gauges there, so the endpoint can be
tested against the mock controller.
Closes#1009
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Rethrow errors other than ENOENT and ENOTDIR when reading the package
spec as a directory, mark the tests that run npm as slow so FAST_TEST
skips them, and use ./external_plugins/my_plugin in the README examples.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Plugins with only host, instance or ctl code have no reason to ship a
webpack build, yet the plugin list showed "Missing dist/web/manifest.json"
as an error for them and the controller logged a warning on every start.
Decide whether a build is expected from the plugin declaration, using the
same rule the create tool uses to decide when to generate one: a web or
controller entrypoint, or any config fields. Plugins outside that rule get
no bundle path and no error, the web UI skips loading them, and the plugin
pages show them as having no web module instead of an error or a prompt to
reload.
Fixes#1004
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Config files hold the auth secret and tokens, so the default 0o644 lets
every user on the system read them. Config.save, the ctl config written
by the controller bootstrap, ctl host create-config and the config
migration in create now pass mode 0o600.
safeOutputFile also applies the mode to the temporary file it writes,
since writeFile only honours mode on creation and a leftover temporary
from a failed write would otherwise keep its old mode.
Closes#1005
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Replace invokeHook and the per plugin on* methods with AsyncHook
collections on the controller, host, instance, clusterioctl and web
control objects. Plugin entrypoints export a default function that
receives a load context and attaches handlers to the hooks it needs.
Class exports still load through fromContext with a deprecation
warning. The create templates and docs use the entrypoint function.
This is clusterio/clusterio#921 recreated on top of master after the
ESM migration and the PluginDeclaration permissions change.
Closes#730
Co-Authored-By: Cooldude2606 <25043174+Cooldude2606@users.noreply.github.com>
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Adds a permissions array to PluginDeclaration, a type-level Permissions
registry that plugins extend with module augmentation, and
registerPluginPermissions() called from all entrypoints. checkPermission
and the web UI hasPermission helpers now take PermissionName so typos are
compile errors. Core definitions move into a corePermissions array that
the interface derives its keys from.
Closes#987
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: Cooldude2606 <25043174+Cooldude2606@users.noreply.github.com>
Migrate the usage of CommonJS specific code and imports to ESM. Roughly
summarised this:
- Changes all require() calls to import statement or expressions.
- Changes usage of module.exports to export statements.
- Replaces require.resolve with import.meta.resolve.
- Replaces conditional imports with conditional subpath imports.
- Replaces module === require.main with import.meta.main.
- Adds the full filename with extention to all relative imports.
- Changes all usage of __dirname and __filename to their import.meta
equivalents.
- Sets "type": "module" in package.json files.
- Removes usage of "use strict".
- Adds .ts an an alias of .js for the webpack build.
Due to differences in how require and import resolves files the plugin
entrypoints will have to include the filename and extension after this
migration in order to work.
